PFCS-116 Perfect Form Sprayer

Arco Item Number:

The Perfect Form & Concrete Sprayer is designed for applying concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and other construction chemicals. The success of your project can often depend on applying these products correctly. Ensure proper application of release agents and other formulas with this form and concrete sprayer. Uniformly applying product is easy with this form and concrete sprayer. The sprayer has a 3.4 gal (12.87 L) capacity and two in-line filters that make cleaning easy and eliminate spray tip clogging. Use either the air fill inlet or the hand pump to pressurize The Perfect Sprayer up to 116 psi. Finally, a backpack-style carrying strap makes for easy transportation.

Features of this Form and Concrete Sprayer

Heavy-duty, stainless steel tank resists corrosion
Pressurizable up to 116 psi
Pressurize via compressed air inlet or via hand pump
5 ft (1.5 m) chemically resistant spray hose
Spray gun trigger valve
Swivel hose to trigger valve connector
Pump cover to keep debris out of tank
Backpack style carrying strap for easy portability
Wide base prevents sprayer from falling over
Pressure-regulating, non-dripping flow control valve

Sprayer Tips

Using the right sprayer tip is important to ensure quality results. Refer to the Spray Tip Recommendation Guide before use as best practice. Use Standard 40 PSI CF Valve for water-based products, 450 VOC release agents, and non-LVOC slealers and cure & seals at temperatures above 35 degrees F. Use Optional 60 PSI CF Valve for 250 and 100 VOC release agents at all temperatures and 450 VOC release agents at temperatures below 35 degrees F.

Maintenance

Empty the contents of the sprayer and clean with the appropriate cleaning solutions because this will keep your sprayer in proper working condition. Leave the lid loose to allow the empty tank to air dry. In the event that the sponge bronze liquid filter becomes plugged, remove the filter and wash out with solvent.